Skip to product information
1 of 4

ObsidianWire®

ST Custom HH6 G2

Custom HH for Strat® '6 -Way' Gen2

Regular price
£102.00 GBP
Regular price
Sale price
£102.00 GBP

Super Easy, Solder-less Install
Key Features:

  • New 'Gen2' Model
  • Custom controls for 'HH' Strat®
  • '6-Way' switching system
  • Tunable coil split for fuller split coil sounds
  • Fits Fender® Strat®
  • Fits Squier® Strat® with adjustments


  • Hurry, only 14 items left in stock!

FAST SHIPPING

5 YEAR WARRANTY

ObsidianWire solderless install logo

Super Easy, Solder-less Install
All Obsidian® Pro-Wired Electronics are super easy to install, and allow for solder-less pickup changes with Obsidian® Plug, Play & Enjoy connectors. 

 


Custom HH '6 Way' Gen2 - HH Strat Wiring Harness

We have built the Obsidian 6 Way HH wiring harness for Stratocaster with TUNEABLE DUAL SC (SPLIT COIL) so you can enjoy the full output and clarity of your humbuckers, AND switch them in to 'Split Coil' mode for lower output, single coil goodness that is fine tunable to your liking.

NEW // GEN 2 UPDATES

To improve on our already super popular Custom HH harness we have

  • Added a tuneability function to the coil split - so you can craft your split coil sounds to be fuller and better rounded, or set them to 'quiet' for a more traditional full split.
  • Easier Install - We have moved the push/pull coil split pot to the second tone control position to get it out of the way of the solderless connector, making for an easier install.

TUNABLE ESC (COIL SPLIT) 

Turn your humbuckers in to single coils, and back again. To add true versatility to your guitar we build in TUNABLE SC, to split your humbucker to a single-coil for lower output, more dynamic tones.

We incorporate a Coil Split 'Voice' control, which allows you to fine tune the amount of signal that is sent to ground.

  • 'QUIET' = FULL SPLIT (TRADITIONAL COIL SPLIT)
  • 'LOUD' = SEMI SPLIT (LAMBERTONES SPLIT FOR FULLER SPLIT COIL)

TUNABLE SC is built in to your volume controls using push/pull pots, so no extra mods are required to your guitar.

- Requires split coil compatible humbuckers

CRYSTAL CLEAR TONE

Retain clarity at lower volumes. To make your tone crystal clear at lower volumes we include an Obsidian® Custom spec treble bleed mod. This prevents tone 'muddiness' at low volumes by allowing high frequencies to pass along a separate path to your amp, rather than being stopped short by the increasing resistance at the volume control.

SWITCH LAYOUT

Push Pull DOWN

1: Bridge Humbucker 
2: Bridge & Neck - Humbucker 
3: Neck  - Humbucker 

Push Pull UP

1: Bridge - Single Coil 
2: Bridge & Neck - Single Coil 
3: Neck - Single Coil 

CONTROL LAYOUT

Switch: 3 - Way
Control 1: Master Volume
Control 2: Tone Control 1 (Neck)
Control 3: Tone Control 2 (Bridge)


ObsidianWire HH wiring harness for Fender Stratocaster with tunable split coil & 6 way switching
Side view of the ObsidianWire HH wiring harness for Fender Stratocaster with tunable split coil & 6 way switching
Top down view of the ObsidianWire HH wiring harness for Fender Stratocaster with tunable split coil & 6 way switching
Top down view of the ObsidianWire HH wiring harness for Fender Stratocaster with tunable split coil & 6 way switching

Humbucker Optimized Wiring for - HH Stratocaster®

The Custom HH for Strat® '6 -Way' Gen2

  • New 'Gen2' Model
  • Custom controls for 'HH' Strat®
  • '6-Way' switching system
  • Tunable coil split for fuller split coil sounds
  • Fits Fender® Strat®
  • Fits Squier® Strat® with adjustments

Details

Description

ObsidianWire solderless install logo

Super Easy, Solder-less Install
All Obsidian® Pro-Wired Electronics are super easy to install, and allow for solder-less pickup changes with Obsidian® Plug, Play & Enjoy connectors. 

 


Custom HH '6 Way' Gen2 - HH Strat Wiring Harness

We have built the Obsidian 6 Way HH wiring harness for Stratocaster with TUNEABLE DUAL SC (SPLIT COIL) so you can enjoy the full output and clarity of your humbuckers, AND switch them in to 'Split Coil' mode for lower output, single coil goodness that is fine tunable to your liking.

NEW // GEN 2 UPDATES

To improve on our already super popular Custom HH harness we have

  • Added a tuneability function to the coil split - so you can craft your split coil sounds to be fuller and better rounded, or set them to 'quiet' for a more traditional full split.
  • Easier Install - We have moved the push/pull coil split pot to the second tone control position to get it out of the way of the solderless connector, making for an easier install.

TUNABLE ESC (COIL SPLIT) 

Turn your humbuckers in to single coils, and back again. To add true versatility to your guitar we build in TUNABLE SC, to split your humbucker to a single-coil for lower output, more dynamic tones.

We incorporate a Coil Split 'Voice' control, which allows you to fine tune the amount of signal that is sent to ground.

  • 'QUIET' = FULL SPLIT (TRADITIONAL COIL SPLIT)
  • 'LOUD' = SEMI SPLIT (LAMBERTONES SPLIT FOR FULLER SPLIT COIL)

TUNABLE SC is built in to your volume controls using push/pull pots, so no extra mods are required to your guitar.

- Requires split coil compatible humbuckers

CRYSTAL CLEAR TONE

Retain clarity at lower volumes. To make your tone crystal clear at lower volumes we include an Obsidian® Custom spec treble bleed mod. This prevents tone 'muddiness' at low volumes by allowing high frequencies to pass along a separate path to your amp, rather than being stopped short by the increasing resistance at the volume control.

SWITCH LAYOUT

Push Pull DOWN

1: Bridge Humbucker 
2: Bridge & Neck - Humbucker 
3: Neck  - Humbucker 

Push Pull UP

1: Bridge - Single Coil 
2: Bridge & Neck - Single Coil 
3: Neck - Single Coil 

CONTROL LAYOUT

Switch: 3 - Way
Control 1: Master Volume
Control 2: Tone Control 1 (Neck)
Control 3: Tone Control 2 (Bridge)


Specs

BUILT IN HOUSE WITH

  • Potentiometers: Obsidian® Custom CTS® Pots 500K (+/-10%) Split Shaft / 24 Spline
  • Capacitors: (150 Series Polyester Film 0.022uf) (+/-5%)
  • Switch: Genuine Oak® 3 Way Switch
  • Jack: Pro-Wired Switchcraft® J11 Mono // OR Pure Tone® Mono Multi-Contact 1/4 in

Compatibility

BUILT TO FIT

  • Fits: Fender® HH Stratocaster® - Direct Fit // Right Hand Guitar Only
  • Fits: Squier® HH Stratocaster® - Widen Control holes to 10mm & replace knobs
  • Always Check: Requires Minimum Cavity Depth 29.2mm / 1.15"
  • Knobs: Requires US spec 24 spline knobs
  • Pickups: Built for two humbucker or P90 loaded Strat® (HH)
  • Coil splitting: Requires compatible four conductor humbuckers

DOES NOT FIT

  • Does NOT fit: Left Handed Guitars // Any guitar not described above

Install

For install help and other resources please go to our Info Hub.

Shipping

Where We Ship

We are currently shipping direct to:

  • United States
  • Australia
  • United Kingdom
  • New Zealand
  • Hong Kong
  • Iceland
  • Norway
  • Switzerland

For other countries - See International Dealers

United States

Standard Orders 

Ship from Michigan, USA

Please note that due to the way in-state taxes are collected, we cannot ship website orders within Michigan state. If you are based in Michigan, please order through our Amazon store here as this is set up to collect the required sales taxes. Apologies for any inconvenience caused.

Shipping method: Business days: Price (US$)
USPS TRACKED 3 - 5 6.99
FEDEX HOME DELIVERY 3 - 5 19.99
FEDEX EXPRESS SAVER 2 - 4 22.99
FEDEX EXPRESS SAVER 2 - 4 28.99

Pro-Wired Loaded Pickguards  

Ship Direct from Christchurch, New Zealand

All ObsidianWire™ Loaded pickguards are made to order and ship direct from our location in Christchurch, New Zealand. We have an expected build time of 6 - 12 business days, and will let you know if we expect any delays.

Rest of World

Ship Direct from Christchurch, New Zealand

We ship all orders outside of the United States from our location in Christchurch, New Zealand. Get shipping cost and delivery timeframes at checkout.

Taxes and duties

Obsidian® DOES NOT pay duties, taxes or customs clearance charges.
Duties and taxes charged by your local customs agency, will be your own responsibility.
If you live outside the USA, we recommend checking with your own country's customs agency what these may be prior to ordering. 
If you are concerned, consider ordering from dealer near you 
International Dealers

  • Solderless Install

    Super easy to install, and allow for solder-less pickup changes with Obsidian® Plug, Play & Enjoy connectors.

  • Pro-Grade Quality

    The absolute best guitar wiring upgrades, using custom specified parts and perfected techniques to ensure that your harness will be an upgrade for you and your guitar. Every time.

  • Greater Functionality

    Guitar electronics that will deliver a greater range of sounds from your pickups, with more switching options, and more dynamic setups to suit your guitar.

  • Improved Sound

    Guitar wiring that allows the full dynamic range of your pickups, and just as importantly, help find a harness that is matched to you.

Customer Reviews

Based on 23 reviews
91%
(21)
4%
(1)
0%
(0)
0%
(0)
4%
(1)
B
Bruce Hicken (Hinesburg, US)
Install Time: 30 - 60 minutes
Build Quality:
Very bad
Excellent
Functionality:
Same as stock
Greater range of sounds
Sound:
Terrible
Amazing
Revised review from 1/20/23

Hello - I am the person who left a one star review on 1/20/23. I never did get around to completing this project with a competing product. Then recently I saw that OW had re-engineered and improved the product as I (and no doubt others) had suggested with the push pull pot in the bridge tone position. I went ahead and purchased and installed with no fuss no muss at all. Sounds great and works as advertised. Thanks to O Wire for listening to feedback and improving their already great product line.

S
Steve Lopez (Charleston, US)
Install Time: 11 - 20 minutes
Build Quality:
Very bad
Excellent
Functionality:
Same as stock
Greater range of sounds
Sound:
Terrible
Amazing
Awesome

This makes building a custom guitar a breeze and build quality is excellent

k
k.m.

Worked great easy to install

T
Thomas Marshall (Melbourne, AU)
Install Time: 11 - 20 minutes
Build Quality:
Very bad
Excellent
Functionality:
Same as stock
Greater range of sounds
Sound:
Terrible
Amazing
HH strat

I found the install would be easier if the connection block faced the other way and not crammed up against the pots, making it hard to know when the cable was in deep enough. Other than that it was a breeze, and the unit works perfectly

J
Joe Matheson (Salmon Arm, CA)
Install Time: 11 - 20 minutes
Build Quality:
Very bad
Excellent
Functionality:
Same as stock
Greater range of sounds
Sound:
Terrible
Amazing
Fantastic Warranty and Customer Service

Purchased your HH Strat setup. Installed it on my customized "Fender Prodigy" which now makes it a "Fender Stratigy"I wanted only the best for my project and I heard you guys were it. Buttery smooth controls, simple installation, and a clean control cavity. Had some issues early on and you guys were 100% helpful. Thank you ObsidianWire!!